MTT Kit

Mounting the SSD or OVP2 to a flange can be accomplished via drilling and tapping the edge of the flange for a 5/16-18×1” or M8-1.25x20mm fully-threaded stud with jam nuts, or by pin brazing an M8x16 stud to each flange. For mounting using tapped holes and studs, specify DEI part number MTT-516 for the 5/16” threaded studs, or MTT-M8 for the M8 threaded studs.

Note: Verify that the dimensions for this mounting arrangement are suitable for the flange before ordering.

ORDERING INFORMATION

For Mounting with Tapped studs:

• MTT-516
• MTT-M8