The MTF Kit supports the mounting of SSD and OVP2 decouplers, which can be installed directly on the flange using existing flange bolts.
This kit is furnished with four nickel-plated adapter plates, two of which are attached to each side of the decoupler device while the other two secure to opposite faces of the flange. The plates attached to the decoupler then interconnect to the flange plates with provided hardware. To install these devices using existing flange bolts, the flange must have a machined, unpainted outer face to mate to the bus bars for proper installation. An appropriate anti-corrosion compound is included for the bracket to flange interface.
- MTF Kit
- Material: #110 Copper
- Plating: Nickel Electroplated
- Thickness: .095″
INCLUDED IN THIS KIT
- Flange Brackets
- Nuts, Bolts, Washers
Note: Specify flange bolt hole size at the time of purchase. Alternatively, the ANSI # Class and Pipe Diameter can be provided. The proper MTF Kit size will be determined prior to shipment.